產品[
TOHNICHI扭力起子26RTD
]資料
如果您對該產品感興趣的話,可以
產品名稱:
TOHNICHI扭力起子26RTD
產品型號:
26RTD
產品展商:
日本東日
關注指數:1158
產品文檔:
無相關文檔
簡單介紹
TOHNICHI扭力起子26RTDTOHNICHI扭力起子3RTDRTD扭力起子(空轉式) 達到設定扭力值時,離合器跳脫形成空轉作業RTD有防止超過扭力負荷(overtorquing)的滑動機構。當設定的扭力值達到時，起子會"click"一聲跳脫，若繼續施加扭力時會持續空轉跳脫，不會再施加額外扭力深圳市騰明達精密儀器提供產品零配件及維修服務,價格及庫存量大.
TOHNICHI扭力起子26RTD的詳細介紹
TOHNICHI扭力起子26RTD的詳細介紹
產品名稱: TOHNICHI扭力起子26RTD
產品型號: 1.5RTD
產品展商: 深圳市騰明達精密儀器有限公司
簡單介紹
TOHNICHI RTD扭力起子TOHNICHI扭力起子3RTDRTD扭力起子(空轉式) 達到設定扭力值時,離合器跳脫形成空轉作業RTD有防止超過扭力負荷(overtorquing)的滑動機構。當設定的扭力值達到時，起子會"click"一聲跳脫，若繼續施加扭力時會持續空轉跳脫，不會再施加額外扭力深圳市騰明達精密儀器提供產品零配件及維修服務,價格及庫存量大.
TOHNICHI扭力起子1.5RTD的詳細介紹
|
TOHNICHI RTD扭力起子TOHNICHI扭力起子3RTDRTD扭力起子(空轉式)
達到設定扭力值時,離合器跳脫形成空轉作業RTD有防止超過扭力負荷(overtorquing)的滑動機構。當設定的扭力值達到時，起子會"click"一聲跳脫，若繼續施加扭力時會持續空轉跳脫，不會再施加額外扭力深圳市騰明達精密儀器提供產品零配件及維修服務,價格及庫存量大. |  | | | RTD扭力起子(空轉式)
達到設定扭力值時,離合器跳脫形成空轉作業 |
| |  | | | | RTD有防止超過扭力負荷(overtorquing)的滑動機構。當設定的扭力值達到時，起子會"click"一聲跳脫，若繼續施加扭力時會持續空轉跳脫，不會再施加額外扭力。 |
弁?
1.Rotary slip clutch mechanism.
2.Reducing the possibility of over-torque by "slipping" when more force is applied beyond "click" or set torque.
3.Toggle clutch type torque detection mechanism ensures long durability.
4.Easy to adjust torque value.
5.Locking mechanism prevents the change of torque while in use.
(Available for RTD15CN-RTD260CN only) |
RTD型規格表 | Select proper model according to unit of measure as following color code : | Accuracy ±3% | MODEL | TORQUE RANGE | Overall Length | Weight Approx. | | S.I. | METRIC | min.-max. | Graduation | mm | in. | g | oz. | S.I. | METRIC | S.I. | METRIC | | | | cN·m | kgf·cm | cN·m | kgf·cm | | | | | | RTD15CN | 1.5RTD | 2-15 | 0.2-1.5 | 0.1 | 0.01 | 100 | 3 15/16 | 50 | 1 7/8 | | RTD30CN | 3RTD | 4-30 | 0.4-3 | 0.2 | 0.02 | 100 | 3 15/16 | 50 | 1 7/8 | | RTD60CN | 6RTD | 10-60 | 1-6 | 0.5 | 0.05 | 105 | 4 5/16 | 80 | 2 7/32 | | RTD120CN | 12RTD | 20-120 | 2-12 | 1 | 0.1 | 120 | 4 31/32 | 125 | 4 7/16 | | RTD260CN | 26RTD | 60-260 | 6-26 | 2 | 0.2 | 140 | 4 5/8 | 225 | 8 13/16 | | RTD500CN | 50RTD | 100-500 | 10-50 | 2.5 | 0.25 | 150 | 6 1/8 | 330 | 11 5/16 |
| | NOTE | 1.For models RTD260CN, 500CN, a hook spanner is supplied as a standard accessory for setting torque.
2.For models RTD120CN, 260CN, a resin grip is standard.
3. This series accepts standard 6.35 (1/4) hex bits, sold separately. Refer to bits page |
|
